Custom processing: Yes Type: Automatic spray gun Model: YF-PQ nozzle diameter: 40 Material: Metal Scope: Coating Spray distance: 400 (mm) paint supply method: the suction Details Product Details efficient diesel gasification temperature gun Technical data: the amount of fuel: Q: 3.5-7 L / h using a hydraulic work: P3: 0.1-0.2 MPa atomizing air pressure: P1: 10-30 MPa pressure combustion: P2: 4-6 MPa atomizing air flow: Use 2.5-3 m3 / min gun:: Q1: 0.7-0-1 m3 / min combustion air volume: Q2 1. gun was painted mouth and spray distance between the surface 30 to 60 cm is appropriate, too close to easy to make the emergence of poor dispersion paint accumulation, paint flying too far because the coating is too thin, thicken, it may produce flying dust adheres to the surface of the membrane. 2. The spray gun moving speed of 3 to 4 m / sec is appropriate, too fast, too slow a uniform coating can not be obtained. 3. Run the gun perpendicular to the surface should be painted, it should be sprayed by the arm movements rather than the wrist action, since the purpose of spraying up arm movements vertical equality, the wrist action will occur in the wrist action as a fulcrum for arc so uneven spray. 4. Spray the order of operations is generally from left to right, then from right to left, top-down bottom-up continuously and repeatedly spraying again, until the completion of spraying the entire surface of the painting. At the same time make a trip after spraying Shihai face overlapping spray coated surface before a stroke width of 1/3 ~ 1/2, for the coating evenly dense, missed spray, each coating thickness generally a "ten" word, a half "cross" or two "cross" to control. General provisions, spray painting the entire surface of a cross-pricked two rows sprayed as a "cross".